The body of Fantaci Porcelain Slab is pressed by a 5600 -ton press and fired at a high temperature of 1230 degrees. The breaking strength reaches 850N and the modulus of rupture reaches 50 MPa, which is higher than the correlation of 700 N and 40 MPa. Standard, with high density, ultra-low water absorption, strong and wear-resistant, and not easy to break under normal use.

6 mm is an innovation of ceramic technology. Using the world's advanced thin scientific production technology, the building materials per unit area can be reduced by more than 1 times, saving more than 60% of raw material resources, and reducing overall energy consumption by more than 50%. At the same time, refer to and compare domestic the specifications of the outer Porcelain Slab have a wider range of applications, and can replace floor tiles, wallpaper, aluminum-plastic panels, tiles, stones, walls, and floors for renovation, so this thickness specification is the most suitable choice. The condition for the innovation of thin ceramic products is that the product must meet the physical and chemical properties and decorative properties. In principle, under the premise of meeting the application strength requirements, the thinner the better, because it must meet the basic indicators such as stress concentration and strength of the building and cannot be added. Additional auxiliary materials reduce application strength and cost. Set 6mm, based on its strength to meet our all-round application requirements, it can replace floor tiles, wallpapers, aluminum-plastic panels, tiles, stones, etc. Now , Fantaci Porcelain Slab have newly released larger specifications of 7 50 x 1500 x 9 mm, 1 2 00x 2400 x 6 mm , 1 6 00x 3200x12mm , the area has increased , so the corresponding thickness will also increase to ensure that the product The relevant performance parameters , such as breaking strength , modulus of rupture, etc., can meet the corresponding use requirements .

Fantaci Porcelain Slab premium and first-class products are classified strictly according to national testing standards. Its entire production process is strictly assessed by professional quality inspectors on various performance indicators of the Slab. The testing standards for Porcelain Slab products All meets the national standard. The strength of the Porcelain Slab, the size of the water absorption, the acid resistance, the alkali resistance, the degree of rapid cooling and heat resistance, the flatness of the glaze, the pinhole, the spot, the size, and the assorted color numbers all affect the classification requirements. The difference between high-quality products and first-class products: 1. Surface distinction: There are no blemishes, pinholes, or spots on the surface of high-quality products. There may be some small pores or missing corners on the surface of first-class products, but it is difficult for non-professionals to see it. 2. Differentiation of flatness: high-quality products have good flatness, no deformation, and neat colors, while first-class products have poor flatness, with slight phenomena such as warped edges, warped corners, arches, and curves. 3. Differentiation of color: the first-class product guarantees that there is no deviation in the color of the Porcelain Slab of the same color number, and the thin Slab of the first - class product does not have many color numbers, and the color has deviation. The first-class products all have the same color number, and the color difference can be distinguished by the naked eye; or the glaze surface is not completely printed; or the surface may be glazed off.

1000x1000x6mm specification, 2 pieces in a box, 14.8KG for a piece, 30KG for a box including packing. 600x1200x6mm specification, 2 pieces per box, 10.5KG per piece, 21KG per box including packaging. 800x1400x6mm specification, 2 pieces in a box, 16.8KG for one piece, 34KG for a box including packing. 900x1800x6mm specification, 2 pieces per box, 24.25KG per piece, 48.5KG per box including packaging. 1200x2400x6mm specification, 1 piece per box, 49KG per piece.

Fantaci Porcelain Slab is an inorganic all-ceramic product. Vitrified tiles are a common name for Porcelain polished tiles, and there are no such thing as vitrified tiles in ceramic terms. According to the national standard "Ceramic Tiles GB_T4100-2015 ", Porcelain tiles refer to ceramic tiles with a water absorption rate of no more than 0.5 %.

(1) Nice (natural marble) series (glazed surface, matte surface) 800x1400x6mm. (2) Roman (natural marble) series (glazed surface) 800x1400x6mm. (3) Toronto (wood grain) series (glazed surface, matte surface) 800x1400x6mm. (4) Paris (solid color) series (glazed surface, matte surface) 1000x 1000x6mm. (5) Nice (natural marble) series (glazed surface, glazed non-polished surface) 1000x1000x6mm. (6) Heidelberg (cement brick) series (mold, matte surface) 1000x 1000x6mm.

Fantaci Porcelain slab currently have categories such as full glaze and marble, and microcrystalline stone is under research and development. Compared with traditional ceramic tiles, marbles, wallpapers, and paints, Fantaci Porcelain panels have the following advantages: (1) Low-carbon advantages ( 1 ) Fantaci Porcelain Slab products are light and thin, the amount of building ceramic materials per unit area can be reduced by more than double, raw material resources can be saved by more than 60% , comprehensive energy consumption can be reduced by more than 50% , energy saving and environmental protection, and the weight is only 1/ of traditional ceramics 3. Greatly save logistics costs. (2) Effectively reduce the load of the building itself. For high-rise construction projects, the effect is more obvious, and it can reduce the installation accessories and labor costs. For floors below 24 meters, wet paste can be used, which saves costs greatly. (3) It is not necessary to pry up the original wall and floor tiles in the renovation of old houses, which reduces noise pollution, reduces the cost of laying and pasting, and shortens the construction period. (2) Material advantages (4 ) Compared with aluminum-plastic panels, thin panels are used in exterior walls without deformation, fading, and stronger wear resistance. (5) Compared with wallpaper, it has higher hardness, moisture resistance, long life, fire resistance and heat resistance. (6) Compared with wall tiles such as tiles, there will never be cracks, and it is more environmentally friendly, easier to maintain, and durable. (7) Compared with stone, it has lower water absorption, no color difference, no radiation, simple construction, and cost saving. (3) Application advantages (8) The cutting and processing of Fantaci Porcelain slab is more convenient and low cost. It can be accurately cut into various sizes with a professional manual broach or glass knife, which can give designers more design space, especially in terms of size matching or mix and match. (9) Because of the thin bonding layer and the thin material, itself, the floor heating effect is better, the energy loss is less, and the space temperature is raised faster; (10) Fantaci Porcelain Slab, with its original design closely following the Italian trend, is more artistic in decoration, rich and stable in color, and easy to maintain. The brick surface has various effects, can be bonded with other materials, has outstanding personality, and can be customized, which can not only meet the demand for environmentally friendly materials, but also reflect individuality and artistic taste.

: The surface effect is made by applying inkjet printing technology, roller printing technology, mold, etc.

Because Fantaci Porcelain slab are selected natural inorganic raw materials, after calcination at a high temperature of 1230 degrees, they are colorless, odorless, harmless, and non-radioactive products. They are made of the same material as bowls, saucers, and cups used at home. They are safe, durable, and beautiful. The degree of density is high, there are no small gaps on the surface, and it is naturally dirt resistant.

The research and development goal of Fantaci Porcelain Slab is to improve the construction grade and reduce the overall cost. The unit price of FANTACI tiles is not more expensive than marble and traditional ceramic tiles of the same specification, but we have reduced logistics costs, labor costs, and wear and tear costs, truly achieving the goal of saving money, labor, time, beauty, safety and durability.

: According to its light and thin characteristics, FANTACI Porcelain slab are not only packed in cartons, but also specially designed in four-sided sealed plywood boxes. The four sides are padded with foam to prevent damage, ensuring safer, faster, and more convenient transportation. However, ceramic products are fragile, so it is recommended to handle them with care, manage them correctly, and use them with care.

If the damage is caused by quality problems, Fantaci will be responsible; if the damage is caused by the logistics company not loading and unloading in the correct way during transportation, the logistics company will be responsible. According to relevant national regulations, under normal circumstances, the damage rate of ceramic products during transportation is within a reasonable range of 3 %.

FANTACI Porcelain Slab has established a systematic and powerful after-sales service system. If there is a major project that requires the company to help design the paving effect map, the company will instantly design the paving effect that satisfies the customer, cooperate, and guide the entire process. Technical construction, and timely adjust and ensure the construction progress and quality according to the problems found on site.

FANTACI Porcelain Slab is an environmentally friendly product that has been calcined at 1230 degrees. It is acid-resistant, alkali-resistant, corrosion-resistant, dirt-resistant, and non-fading. In case of special reasons, the company will assign a customer service specialist to solve it on the spot.

The complete company name and organization code must be provided. a tax point of 10% of the total amount of withdrawals from the public account is required;

Theoretically, based on the practical area of 100 square meters, laying FANTACI tiles on the wall can save 1%-3% of space, but the final settlement standard needs to be determined according to the actual situation of the project.

(1) Environmental management system certification (ISO14001: 2004) certificate. (2) Quality management system certification (ISO9001: 2008) certificate. (4) safety production standardization certificate. (5) High-tech enterprise certificate. (6) Brand trademark registration certificate. (8) Patent certificate for brick primer system. (9) Patent certificate for brick press launch platform. (10) Patent certificate for automatic Porcelain Slab production system. (11) Patent certificate of composite ceramic Slab. (12) A patent certificate for a Slab splicing leveler.

The quality inspection of FANTACI Porcelain Slab series products has passed ISO9001 international quality system certification, ISO14001 international environmental management system certification, and European Union Compulsory Certification (CE).

FANTACI Porcelain slab have unique technologies in formulation , mud preparation, powder preparation, and compression molding to ensure that the products produced are more durable and tougher.

The support of agent FANTACI Porcelain Slab is as follows: (1) Market price protection. (2) Team training. (3) Product application guidance. (4) Display support for specialty stores. (5) Channel assistance and support.

(1) The performance advantages of FANTACI Porcelain slab are manifested in their ultra-high density and ultra-low water absorption. The density of the Porcelain Slab directly determines its destructive strength, water absorption rate, and elastic limit, which is an especially important indicator. Although the country has no express regulations on the density of Porcelain Slabs, the density of FANTACI Porcelain slab is controlled at about 2.5 grams per cubic centimeter in the internal control standard, which is better than natural marble. Water absorption is an important indicator of Porcelain Slabs, which involves the safety of construction and application. If the water absorption rate of the Porcelain Slab is too high, the product will absorb too much water during the wall paving. When the temperature difference changes too much, it will be affected by thermal expansion and contraction, and it will easily crack after repeated times, causing safety hazards. In the internal control standard of FANTACI ceramic boards, the water absorption rate can generally be controlled below 0.08%, which is more than 80% lower than the standard requirement. Since the thickness of the Porcelain Slab is between 6mm and 12mm, if the water absorption rate is too high, its performance will be reduced, and the freeze-thaw performance of the product will be reduced, and there will be cracks or even the risk of falling during application. (2) The performance advantages of FANTACI Porcelain slab are manifested in their strong failure strength and fracture modulus. These two items are crucial indicators of Porcelain Slabs, involving key properties such as impact resistance and wind pressure resistance. Because the Porcelain Slab is to meet the basic wall and floor paving use, it must have a strong breaking strength and flexural strength. In the internal control standard of FANTACI Porcelain Slabs, the breaking strength can reach 850 Newtons, and the breaking modulus can reach more than 50 MPa, which is more than 25% higher than the requirement. (3) The performance advantage of FANTACI Porcelain Slab is manifested in its extremely high flatness. Flatness is the most basic indicator of an excellent product. Since the product becomes thinner and larger, to ensure its flatness, it can only be achieved under the precise cooperation of formula, firing temperature curve, process technology and other aspects. According to national standards, for Porcelain slab with a side length greater than 600 mm, the maximum allowable deviation of the convex and concave values cannot exceed 2 mm. The internal control standard of FANTACI Porcelain slab can control the error within 0.4 mm, which is 80% better than the national standard. If the flatness is unqualified, it will be difficult for workers to pave it flat, which will affect the appearance; even if it is paved flat, it will be easy to crack for a long time under the action of stress. (4) The performance advantage of FANTACI Porcelain Slab is reflected in the strict size deviation. The national standard stipulates that the maximum length and width cannot exceed plus or minus 1 mm, the length of the opposite side should be less than 1 mm, and the length of the diagonal should be less than 1.5 mm. In the laboratory, there are automatic testing equipment, which can accurately check the side length error and diagonal line error of the product. According to FANTACI's internal control standard, the side length error is controlled within 0.6mm, and the opposite side and diagonal length error is controlled within 0.8mm. Only when the size deviation is within the controllable range, the brick joints will not be uneven in size or bent after the product is laid, which will affect the appearance. (5) The performance advantage of FANTACI Porcelain Slab is reflected in its good elastic limit. This is also a particularly important indicator. Whether it is the wall or the ground, it will be affected by the force of thermal expansion and contraction. At the same time, buildings will vibrate, high-rise buildings will swing by themselves, resulting in whiplash effect, and some buildings will settle slightly. Only when the elastic limit is well controlled, the Porcelain Slab will not be deformed and cracked due to insufficient center deviation and insufficient toughness under the condition of slight deformation and vibration of the building. (6) The performance advantage of FANTACI Porcelain Slab is reflected in its good cutting performance. During the firing process of Porcelain Slabs, the density, firing curve, and internal stress of the product will all affect the cutting performance. Cutting performance is the most intuitive manifestation of assessing the internal quality of the product. If the internal quality of the product is not good, it is very difficult to cut it, and it may even crack when the knife is cut. Due to the uneven spacing of internal stress, poor quality Porcelain slab is easy to bend when cut. Only high-quality products have uniform internal stress during the production process, so that cracking, brittle collapse, and secondary deformation will not occur during the cutting process. FANTACI Porcelain boards pay great attention to the control of product quality. In the production process, several methods are generally used to test the cutting performance, including electric saws, ordinary broaches, glass knives and other equipment, which can easily cut arcs, squares, and circles. Shape and other shapes, there is no obvious deformation after cutting, and the damage rate is low. (7) The performance advantage of FANTACI Porcelain Slab is reflected in its strong pollution resistance. In wall and floor laying, Porcelain panels will be attacked by pollutants (acid rain, oil, chemical stains, sewage). If the pollution resistance is insufficient, the pollutants will easily penetrate and cause the surface of the product to change color. The national standard requires that the pollution resistance of glazed Porcelain panels should not be lower than level 3, and the internal control standard of FANTACI Porcelain panels can generally reach level 5, which is an excellent level in this standard.

(1 ) Compared with aluminum-plastic panels, thin panels are applied to exterior walls without deformation, fading, and stronger wear resistance. (2 ) Compared with wallpaper, it has higher hardness, moisture resistance, long service life, fire resistance and heat resistance. (3 ) Compared with wall tiles such as tiles, there will never be cracks, and it is more environmentally friendly, easier to maintain, and durable. (4 ) Compared with stone, it has lower water absorption, no color difference, no radiation, simple construction and cost saving.

1/3 of that of ordinary bricks, and it can meet the strength requirements. It is a new type of environmental protection building decoration material. The launch of these new products is in line with the industrial policy of energy conservation and emission reduction advocated by the state, which protects the environment and greatly improves the technical level of building environmental protection building materials. Under the general trend of energy conservation, environmental protection and reduction of carbon emissions, the thinning of ceramic tiles will inevitably become the main direction of the industry's future development. Therefore, the earlier the technology of ceramic tile thinning production is mastered, the better the company will be in the competition. In order to promote thin bricks in application, enterprises are responsible for producing, persuading merchants to sell, and promoting the performance and use significance of thin bricks to consumers. And the sooner merchants enter the sales of thin bricks, they can also take the lead in the market competition.

Porcelain slabare made of inorganic non-metallic materials such as clay after high-temperature calcination. The main components are: quartz ( SiO₂) , feldspar (silicon dioxide and alumina), kaolin (Porcelain clay), etc., as well as other chemical materials, additive. The names of raw materials required for ceramic products are all similar, mainly because the chemical composition of each type of raw material is different, and the formula for producing different products is different.

Porcelain slabare also fired at high temperature. According to the decoration requirements of buildings, the surface can be made into smooth, matte, and concave-convex surfaces. The surface texture design comes from nature, and its performance is better than nature.

The main applications of Porcelain slabare as follows: (1) As a decorative material for interior and exterior walls and floors of modern buildings. (2) As a lightweight and thin partition wall material in modern buildings. (3) As a modern building facade maintenance structure material. (4) As a decorative material for furniture products and electrical products. ( 5 ) As a decorative material for anti-corrosion, acid and alkali resistance and anti-bacteria in special environments. In addition, there are no special restrictions on the use of Porcelain Slabs. The "Porcelain Slab Technology Application Regulations" stipulates that in the construction of exterior walls below 24 meters, wet paste can be used, which greatly reduces the overall cost of buildings; for buildings above 24 meters, the construction process of hanging paste or dry hanging is adopted.

Refer to " GB/T23266-2009 Ceramic Slab "Standard instructions, the following methods can be used to measure the performance of Porcelain Slabs: 1. The Porcelain Slab can be knocked, and the sound is crisp and clear, indicating that the Porcelain density and hardness are high and the quality is good . 2. Pour a glass of water on the back of the Porcelain Slab. The water stains spread rapidly, indicating that the water absorption rate is high, otherwise it is low . The lower the water absorption rate, the higher the internal stability of the tiles, and the more suitable for spaces with high humidity or moisture content ( such as bathrooms, kitchens ) , and there will be no problems such as black spots . 3. You can use a hard object and apply regular force to scrape the glazed surface of the Porcelain Slab to see if the traces left can be wiped off . The tiles that are not easy to produce marks are the tiles with higher hardness. 4. At a distance of about 1 meter, check whether the color of the Porcelain Slab is clear or not. Check with the naked eye to see if there are pinholes. The pinholes are easy to accumulate dirt. Look at the pattern. Defects such as disconnection and dislocation indicate that the product has good performance . 5. Choose a flat ground, put the Porcelain Slab upright, and pour it on one side until it is flat on the ground without cracking, which means the product has high strength .